Part Number Hot Search : 
CR256 P3601MSH KMOC3042 T2907A K4N38A 84110310 STM32F1 H120B
Product Description
Full Text Search
 

To Download TG2206F Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TG2206F
TOSHIBA GaAs Linear Integrated Circuit GaAs Monolithic
TG2206F
RF SPDT Swith Switch The Receive Filter for Mobile Communication Switch The Diversity Antenna Switch The Local Signal Features
l Low insertion loss: LOSS = 0.4dB (typ.) l Hight isolation: ISL = 28dB (typ.) l Low voltage operation: VC = 0 V/2.5 V l Small package: SM6 package (2.9 x 1.6 x 1.1 mm)
Pin Assignment (top view)
Marking
Weight: 0.014 g (typ.)
Maximum Ratings (Ta = 25C)
Characteristic Control voltage Input power Operating temperature range Storage temperature range Symbol VC1 VC2 Pi Topr Tstg Rating 5 5 1 -40~85 -55~125 Unit V V W C C
Caution
This device is electrostatic sensitivity. Please handle with caution.
1
2002-07-31
TG2206F
Electrical Characteristics (f = 1 GHz, Ta = 25C, Zg = ZI = 50 )
Characteristics Symbol LOSS (1) Insertion loss LOSS (2) ISL (1) Isolation ISL (2) Output power at 1dB gain compression Control current Switching time Po1dB IC1 IC2 tSW 1 1 1 1 Test Circuit 1 Test Condition VC1 = 2.5 V, VC2 = 0 V, Pi = 0dBmW VC1 = 0 V, VC2 = 2.5 V, Pi = 0dBmW VC1 = 2.5 V, VC2 = 0 V, Pi = 0dBmW VC1 = 0 V, VC2 = 2.5 V, Pi = 0dBmW VC1 = 2.5 V, VC2 = 0 V or VC1 = 0 V, VC2 = 2.5 V VC1 = 0 V, VC2 = 3 V or VC1 = 3 V, VC2 = 0 V VC1 = 0 V, VC2 = 3 V or VC1 = 3 V, VC2 = 0 V Min 25 25 15 Typ. 0.4 0.4 28 28 20 0.01 Max 0.7 dB 0.7 dB 0.01 0.01 dBmW mA s Unit
Block Diagram
Switch Condition
Control Voltage VC1 = 2.5 V VC2 = 0 V VC1 = 0 V VC2 = 2.5 V Switch Condition RFCom - RF1 OFF RFCom - RF2 ON RFCom - RF1 ON RFCom - RF2 OFF
2
2002-07-31
TG2206F
Test Circuit 1 (RF Test Circuit)
Please fix the value of each capacity for using frequency and circuit.
Notice
The circuits and measurements contained in this document are given only in the context of as examples of applications for these products. Moreover, these example application circuits are not intended for mass production, since the high-frequency characteristics (the AC characteristics) of these devices will be affected by the external components which the customer uses, by the design of the circuit and by various other conditions. It is the responsibility of the customer to design external circuits which correctly implement the intended application, and to check the characteristics of the design. TOSHIBA assume no responsibility for the integrity of customer circuit designs or applications.
Recommend Capacity
85 MHz C1 C2 C3 100 pF 100 pF 150 pF 0.8~1 GHz 100 pF 16 pF 13 pF 1.6 GHz 22 pF 10 pF 4 pF 2 GHz 9 pF 9 pF 3 pF
3
2002-07-31
TG2206F
4
2002-07-31
TG2206F
5
2002-07-31
TG2206F
Package Dimensions
6
2002-07-31
TG2206F
RESTRICTIONS ON PRODUCT USE
020704EBC
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium (GaAs) Arsenide is a substance used in the products described in this document. GaAs dust or vapor is harmful to the human body. Do not break, cut, crushu or dissolve chemically. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice.
7
2002-07-31


▲Up To Search▲   

 
Price & Availability of TG2206F

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X